1-300 Ton Waste Incinerator

PRODUCT OVERVIEW

The multi-purpose waste incinerator adopts the most advanced one-stage pyrolysis gasification + surround wind co-firing + secondary.incineration + burn-out treatment. The design of the primary combustion chamber of the incinerator uses the gasification incineration.technology to change the temperature inside the furnace of the incinerator from 200. C to 400. C. The waste does not causeproblems such as frit, slag, and sintering during the incineration process. Compared with the direct combustion furnace and otherfurnaces, the gasification incinerator has very little dust generation, and a secondary incineration burner and a circumferential air.supply device are arranged in the secondary mixing incineration chamber.
At high temperatures, the combustible gas in the flue gas can be fully combusted, and the gas generated by the gasifier can be fullymixed and burned with high efficiency to prevent the carbon material in the gas fliame from escaping and late burning. When the flue.gas enters the high-temperature burnout chamber, the combustion mode is adopted such as tangential entry and tangential entry ofthe combustion-supporting air, so that the flue gas can be fully burned again in the burn-out chamber, and the flue gas is removed bythe swirlinga airflow, and the flue gas is incinerated. The residence time in the furnace is more than 2 seconds, so that the combustible.gas in the flue gas and the combustible material in the fly ash are completely incinerated, and the dry exhaust gas purification device.arranged in the upper part of the incinerator, and hydrogen chloride, sulfur oxide, etc. generated in the incineration are generated.The adsorption treatment is performed, and components such as odor in the flue gas are decomposed at a high temperature-
The flue gas purification system is provided with a calcium hydroxide filter brick and an acid gas for neutralization reaction. therebyachieving the purpose of adsorbing acid gas and purifying exhaust gas. Reduce harmful components in the flue gas to below the.ational "Hazardous Waste Incineration Pollution Control Standard (GB18484-2001" and other standard values.

PRODUCT FEATURES

1, Suitable for incineration: medical waste, living garbage, industrial waste, animal carcasses, residual limb and animal innards.

2, Incineration calorific value: calorific value of about 2800kcal/Kg

3, Furnace body type: vertical cylinder model

4, Equipment capacity: 30-500 kg/h

5,Ignition way: automatic ignition

6, Manual ash, manual feeding auxiliary fuel: liquefied petroleum gas (low calorific value of 10495 kcal/kg)

7, Furnace pressure, adopts the design of negative pressure doesn't backfire,-3--10 mmh2o column

About Our Company