Basic Info.
Type
Microfiltration Machine
Method
Combined Treatment
Usage
Industrial, Home, Agriculture, Hospital
After-Sales Service
Provided
Transport Package
Standard Packing for Export
Product Description
MSC Tailing Waste Water Treatment System
Introduction
MSC coal-bearing waste water treatment equipment is anadvance and efficient complete equipment developed by ourcompany on the basis of years of successful production of coal-water treatment equipment and mainly for coal-sluicing waste water of large and middle power station. This equipment integrates current advanced technologies of sewage treatment, absorbs the advantages of similar products and make further improvement to design a new generation of patented product.
This treatment system designs and combines more reasonably the mixing, reaction, sedimentation, filtration and filter material back wash systems. It is applicable to the rapid purification of industrial waste water with a lot of suspended solids, for example: slime water of coal mine, sewage lizes the closed circulation of industrial water, collects precious raw materials and gain remarkable social and economic benefits in environmental pollution and water saving.
Scope of Application
Treatment of coal-washing water, mine water, mineral separation waste water and chemical sewage.
Equipment Characteristic
1. It can treat the coal-washing waste water of high turbidity less than 4000mg/L (up to 6000mg/L within short time). The water quality after treatment can reach 10mg/L
2. It's possible to operate intermittently without necessity of restart.
3. The unique design of the back wash system prevents the floating layer from caking and clustering of sludge
4. The equipment is easy to operate and manage. It solves the key problem of difficult treatment of coal-washing waste water(As the pollutants are light and fine particles, coal-bearing tar, etc, ordinary treatment method cannot make the water conform
5. It can reduce the energy consumption and reuse the output water, so the economic benefit is remarkable
Measurement of Equipment
According to the local conditions, the owner shall carry out overall analysis and inspection of the water quality of original water and output water
Technical Principl and Structure
The key treatment part of this equipment is designed on the basis of layer separation theory and delayed reaction theory. A single treatment unit can realize at the same time the chemical cohesion reaction, biochemical decomposition and sedimentation to reach the sewage emission standard, then the filtration and absorption with filter bed will make the water quality reach the reuse standard. In a single process, the water head of only one water pump is used to meet the hydraulic condition of each work point. It has advantages such as low operation cost, easy managemeent, smaller indensity and good effect of back wash.
The sewage is absorbed by pump from the coal-water adjusting basin into the variable speed coagulation reactor to generate physical and chemical reaction and a series of biochemical reaction in hydraulic condition. The condensed water enters into the layer separation zone and according to the variation of flow speed.
The sewage is subject to biochemical decomposition and sedimentation. Conform after preliminary treatment, the water enters into the filter tank. When passing the filter bed with OTB activated filter material, the water is subject to further absorption, screening and oxidation removal to reach the objective of water purification for use.
1. Coal-water adjusting basin (concrete basin prepared by user)
According to the characteristics of treated water, it is designed in a step flow structure. The sewage normally stays in the basin for 6-8 hour
2. MSC coal-bearing waste water treatmen
After treatment in MSC coal-bearing waste water equipment,variable speed coagulation, layer separatiopn and filtration, the orginal water shall have a turbidity less than 10mg/L, The coagulation and flocculation liquors are supplied by dosing equipment and added from the pipe mixer to the vanable speed action part of MSC equipment. MSC equipment is composed by five parts:
1)variable speed coagulation reaction part:
2)layer separation zone
3)sludge-water separation zone;
4) Upper clarification zone;
5)filtration part.
In the sludge-water separation zone, the sludge is drained with hydrostatic pressure. The functions of this zone include increasing the concentration of drained sludge, extending sludge draining period and saving water used for sludge draining in order to save energy.In the upper clarification zone, the water contains some sheets condensed by suspended solids. The cohesive gum particales not removable sedimentation will pass by the filter layer in the filter tank so that the filtered water can reach the output requirement.
MSC equipment is the core of the water treatment system. The equipment is designed and mabufactured strictly according to the layer separation theory and delayed reaction mode. The whole process of chemical cohesion reaction and sedimentation is realized in a single equipment. The main equipment is composed by speed variation component, layer separation device, sludge-water separation device and filter device
3. Supportive equipmet
(1). Dosing equipment
The dosing equipment is in charge of distribution and supply of necessary liquors in the system. It is composed by stiming device, liquor storage device and liquor measuring pump. The stirring shaft is made of stainless steel. The liquor tank is made of A 3 line with rubber or stainless steel. The pipeline is made of ABS.
(2). Pipe mixer
In the pipe mixer are installed a forward component, a backward component and a dosing port. The liquors transported from the dosing equipment and the sewage pumped by the sewage pump are fully mixed in the mixer. The mixing effect can reach 99%
(3). Vacuum scuttlebut
It is applicable to the automatic irrigation by water pump of the ground pump house. It is installed on the water admission pipe before the water pump. It saves the vacuum pump or other modes of vacuum equipment and power and the bottom valve which has a big loss of water head.
Technical Service and Warranty
We offer on-site technical assistance and instruction for installation to users and train their operator Ne offer good after-sales service to our sold products.
About Our Company
Adhering to concept of low energy consumption, low pollution & sustainable environmental protection, we provide one-stop solid waste sewage treatment, harmless treatment of dead animals, odor treatment solutions, municipal sludge, meal waste, domestic waste recycling and reuse, multi-purpose waste incinerator, buried integrated sewage treatment equipment etc.
As a comprehensive industrial enterprise that integrates R & D, production and sales with over 20 years' experience, especially the guaranteed supplier of China Manufacturing Network, we mainly have 2 production bases with rich experience in installation & construction. Our yearly capacity is over 30,000 square meters, which enable very quick delivery.
What's more, professional after-sales service is provided, which includes free remote technical guidance and installation debugging, so that customers needn't worry about products' integrity. Until now, we have cooperated with over 300 companies among 50 countries and regions, already gained much reputation around the world.
Factory And International Certificate
Shipping And Delivery
Pre-Sales & After-Sales Service
1. service network
The service network is Distributed in national & abroad regions and form a complete set of supporting offices, formed a sound service network, the user services will be in place in 48 hours, convenient and efficient.
2. pre-sale service
According to user requirements, we will offer a variety of designs; help the user to select the most appropriate equipment; More for the sake of users, to design a floor plan for the users, and also a reasonable configuration.
3. installation and debugging
Company has experienced professional technicians and senior workshop technicians for free on-site training of buyer's operators and responsible for the guidance of equipment installation, guarantee the operation of the equipment, and to achieve the desired effect.
4. On-site service
Since the date of installation, the company will send engineers for on-site guidance, to supply a timely solution of equipment normal state can not run, which due to the unskillful operators who are not familiar with our machine, and guide the users to grasp the solution of the problems during using the equipment.
5. after-sales maintenance
Since the date of Qualification adjustment, one year warranty, guarantee the quality of the product if non-users artificially, my company free repair. Since the end of the product warranty period, the supplier provide maintenance service for life, and should be paid to provide accessories, appropriate preferential charge for repairs.
6. operation training
Detailed work instructions, professional and technical personnel on-site guidance operation; Regular training for each operator, to make them truly knowledgeable, systematic and professional.
Contact Us
Experience, expertise & innovative spirit have always contributed to our company's growth. If you have any questions please just feel free to contact us, our great honor to offer a solution.
Address:
Room 905, Building 5, Tianan Digital City, 88 Chun Yang Road, Chengyang District, Qingdao, Shandong
Business Type:
Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, IATF16949, HSE, QC 080000, GMP, BSCI
Company Introduction:
Qingdao Youfeng Environmental Protection Equipment Co., Ltd. is located in Qingdao City, Shandong Province. It is a comprehensive industrial enterprise that integrates R&D, production and sales. The company has two production bases with rich experience in installation and construction. The number of employees with bachelor′s degree or above accounts for more than 60%.
The company adhering to the concept of low energy consumption, low pollution and sustainable environmental protection, together with many agricultural and animal husbandry enterprises, focus on the sustainable development of farming and management, to achieve a win-win situation of ecology and economy. Provide one-stop solid waste sewage treatment, harmless treatment of dead animals, odor treatment solutions; Municipal sludge, meal waste, domestic waste recycling and reuse; Multi-purpose waste incinerator; Buried integrated sewage treatment equipment and various automation, intelligent equipment research and development.
